A blank wall doesn’t have to stay that way. And, covering it with frames and other accouterments is not the only way to add some depth and elegance to your walls.
Table of Contents
Enter: the World of Wall Textures.
Adding texture to your walls is a low-cost approach to give your house more character. The additional texture not only adds character to the room but also helps to cover any flaws in the drywall.
In terms of aesthetics and ambiance, different wall textures may make a big difference. Here, keep on reading to get an introduction to seven different kinds of wall textures.
Most Popular of All Wall Textures: Popcorn Walls
Popcorn walls are a popular textured finish used in both homes and businesses. They have a stippled or rough surface that may make a room seem more dynamic.
The texture is made by spraying a unique kind of paint onto a wall surface using different nozzles. Furthermore, the size and kind of nozzle used may determine how light or heavy the final texture will be.
You can always opt for a concrete coating before starting your “texturizing” process for the best results.
Orange Peel Texture
This traditional wall texture, named after the rind of the fruit from which it takes its name, has a smooth, dimpled appearance. It’s a popular option for homeowners because of how cheap it is and how simple it is to put in place.
You can use two applications of drywall mud to get a subtle appearance. After the first coating has dried, you can sand it to a smooth finish. You can spray the second coat on with a compressor and rub it on with a roller with a thick nap to provide a soft, bumpy texture.
You can only see it up close, so it’s perfect for a subtle, light wall texture, yet it’s just as good as heavier textures in hiding imperfections. This appearance is simple to maintain, but it may be difficult to clean properly in small spaces, so it’s not a good choice for high-traffic areas like the kitchen or bathroom.
Comb Walls
There are many parallel lines that make up the comb wall texture.
The joint compound is combed onto the wall to produce the effect. The lines that were drawn to give the wall its distinctive appearance and boost its aesthetic value. If you want to give your room a unique appeal, the comb wall texture is a fantastic choice.
The texture is simple to make and adaptable to any decor style.
Hawk and Trowel Interior Walls
You’ll have to use a hawk and a trowel to make this wall texture.
Using the hawk, one applies the initial layer of plaster to the wall after first painting it with a base coat. To achieve the required finish after the plaster has dried, you’ll use a trowel.
You’ll find this wall texture in commercial and industrial spaces since it is long-lasting and simple to maintain. For a more unique aesthetic, you can use it in residential areas.
Knockdown Texture Walls
Knockdown is a casual, rustic texture often seen on the walls of Mediterranean-style homes.
The flat appearance of the finish is reminiscent of stucco, hence the two are frequently used interchangeably to describe it. This texture is applied in a manner similar to the orange peel style, but with one more stage.
Once the roller has been applied, the bumps may be knocked down with a broad trowel. Despite its smooth surface, the layered impression is rich and substantial, making it an excellent choice for updating a modern room with a sense of depth and sophistication.
The sponge-like wall texture is now popular because of its ability to give a space a sense of depth, character, and warmth.
Sand Swirl Texture
With a sand swirl wall texture, you can bring the soothing sound of the ocean right into your bedroom or bathroom.
The mixture of perlite primer and sand is applied to the wall and then handled with a thick-bristled brush to produce a stunning swirl design. Form neat columns of half fans or a freeform sequence of overlapping Cs or arches. While the sand swirl wall texture is visually comparable to the more elaborate arching comb pattern, it is far more low-key and requires less effort to keep looking good.
A satin finish will highlight the curved surfaces and hold up well in high-traffic areas like bathrooms and kitchens.
Stomp Brush Walls
For a stomp brush wall texture, you’ll use a special brush to apply textured paint or joint compound to the wall. Following that, you can make the textured finish by stomping the brush into the wall.
You make stomp brush wall textures quickly with enough practice and persistence. Therefore, this may be the best choice for you if you want to give your house a special, distinctive appearance.
Skip Trowel
A wall with a skip trowel texture has a thin coat of joint compound applied to it, and you create the texture by dragging a trowel over the surface. Faux stucco is a common finish for walls, and you can use this method to mimic that look or just add some visual variety to an otherwise boring wall.
Not only is mastering skip trowel texture a simple process, but you can customize it to achieve a wide range of effects.
Spray Sand Walls
If you want your walls or ceilings to have that worn, weathered effect, spray sand texture is a great way to go. Before being applied, sand is mixed in with the paint to achieve this effect.
As well as being an inexpensive option for making a statement in a space, it may also be used to hide flaws in the wall or ceiling. When applied to either new or pre-existing surfaces, sand texture takes on the hue of its surrounding paint.
Last but not least, this is a quick and simple way to add some texture to your work.
Interior Walls Done Right
When it comes to wall trends and wall textures, the sky is the limit.
Start by knowing what kind of effect would work best for your decor or design, and then you can accentuate it by getting the right wall texture to add on later. But, the sense of interior design isn’t built in a day.
Check out our home improvement and design sections for more tips and advice that will get your creative juices flowing.
