A shower door is very important for your comfort and privacy. Installing it may seem easy, but you do not want any mistakes to be made in the process. This is why it is always better to allow a professional to do it.
In order to show you the complexity of the process, we have contacted one of the experts from HBSOnTime.com, a family-owned business operating in the Greater Fredericksburg Area, VA. A local handyman such as our expert is a great solution whenever you need help installing a shower door. Without further ado, here are the tools and methods that he uses!
These Are The Tools Used By A Local Handyman For Installing A Shower Door
Before getting into details regarding the process itself, it is very important to understand that the set of tools required to install a shower door is quite complex. This is why doing it yourself can be quite a challenge, especially if you lack experience in this area.
There are safety and mobility tools required, such as safety glasses and a ladder. Also, the process involves using a pencil, measuring tape, and a caulk gun. A local handyman will also have in his bag a hacksaw, 1/4″ masonry drill bit, 1/8″ drill bit, power screwdriver, and center punch.
Step By Step: This Is How A Shower Door Gets Installed
Now that you know which are the tools required in order to get the shower door installed and ready to be used, it is time to understand how the installation process goes. Here are the steps:
- The handyman measures the wall-to-wall distance. He has to leave room for the wall channels to slide;
- The track is placed in the center of the tub ledge. The high side has to be on the outside. This way, the water will not spill on the floor;
- The handyman slides the wall channels over the track. This is how he gets an exact fit, without having to move the track from its position, on the tub ledge.
This is the step where the level is necessary, as the local handyman has to be sure that the wall channels are plumb with the wall. Then, he marks the mounting holes on both sides, and, afterward, he drills and inserts the wall anchors.
- In order for the track installation to go properly, the surface needs to be cleaned. After cleaning it, the worker will apply a band of silicone sealant. Then, he will position the track on the tub, in the area marked. The wall channels are installed afterward, fit into place, and screwed.
- The installation of the header is the next step, but only after measuring it in order to fit onto the wall channels.
- The local handyman will then install the rollers on the glass door panels.
- The inner-sliding panel will be installed next. It is very important for it to be plumbed to the wall.
- Lastly, another band of silicone sealant has to be applied to both of the ends of the track. Also, another band will be applied to the inside and outside seams of the channels. The silicone has to be left to dry for at least one hour.
These are all of the steps required for installing a shower door. It is not an easy process, as it requires attention and skill. This is why it is best for you to ask for the professional services of a local handyman from HBSOnTime.com.