Site icon Home Improvement Press

How to Clean a Ninja Coffee Maker: An In-Depth Guide

How to Clean a Ninja Coffee Maker: An In-Depth Guide

A ninja coffee maker is one of the most popular types of coffee makers on the market. They are known for how easy they are to use, how quickly they brew a cup of coffee, and how well they clean themselves. However, this doesn’t mean that you don’t have to give your ninja coffee maker some love every now and then! This article will provide an in-depth guide on how to properly clean a ninja coffee maker so it can continue brewing delicious cups of java for years to come.

Why You Should Clean Your Coffee Maker Regularly?

When you clean your coffee maker regularly, it will look cleaner and keep its shine. Additionally, regular maintenance on a machine keeps the parts lubricated so they don’t wear as quickly or function as well as they should.

Think of how often you change your car’s oil–the same concept applies to cleaning out your ninja! Lastly, by keeping your device clean you’re ensuring that none of the parts contain any mold, mildew, or bacteria.

Kitchen Reader is the best platform to learn more about the coffee maker and other kitchen accessories so make sure to check it out!

What You’Ll Need:

-Cleaning brush (can be found in most cleaning sections at stores like Target and Walmart)

-White vinegar and water mixture

-Toothbrush (optional; could use a cleaning brush)

-Dish soap (optional; could use a white vinegar and water solution)

-Rubber gloves (optional, but recommended if you have sensitive skin or are dealing with very dirty parts of your ninja coffee maker.)

1) Pour In Cleaning Solution Or Vinegar

Pour in cleaning solution or vinegar and water mixture into the tank.

1) Mix in a 50/50 solution of white vinegar and water. If you’re using just straight-up white vinegar, pour about half a cup into your coffee maker’s reservoir.

Make sure that all parts are submerged in either cleaning solution or vinegar and water mixture to avoid any damage when they come in contact with each other!

2) Now let it sit for 15 minutes so all of those hard to reach areas can soak. You can use this time to clean out the carafe by scrubbing away at any stubborn stains left behind from previous brews. Just make sure not to get too close towards the spout as some cleaners could potentially cause lining deterioration over time! When you’re done with that put the carafe to the side and keep it out of the way.

3) Next, you can use a cleaning brush or toothbrush (if that’s all you have on hand) to clean away any larger dirt particles that are stuck onto your machine! If you don’t want to risk scratching up those pretty plastic parts with your bristles then maybe grab some dish soap as well so we can create a sudsy solution for just this task–it’ll help do most of the work for us!

Just drop in about two tablespoons into the water reservoir and let it sit there while we move onto step three.

If you’re feeling really adventurous, feel free to add a dash of dish soap directly into the water reservoir.

Just make sure not to mix in too much or else your coffee might end up tasting like suds! We want our ninja brewer back ASAP so we can get brewing again–not lose it for good because we ruined its taste!

We don’t want to damage the machine so just stick with straight-up white vinegar in this case.

Just pour about half a cup into your coffee maker’s reservoir and let it sit there for 15 minutes while you clean out that dirty carafe. Proceed onto step three when time is up!

After that, scrub away at any larger chunks of dirt or stains left behind.

If you are looking for the best coffee maker for hard water make sure to check out our article.

2) Press The Clean Button

You can press the clean button and allow your machine to go through its normal cleaning process. This is essentially running fresh water through every part of the ninja coffee maker–including those hard-to-reach corners that we couldn’t reach with our bristles or sudsy solution.

If this is your first time cleaning the device, you’ll see a lot of gross stuff come out in that water! This should be expected since we haven’t cleaned it in quite some time–don’t worry though because everything should go back to normal after following these steps at least once or twice!

Once the cycle finishes up, you can pull out the tank and dump out any excess water.

Once all of that is done, you can take your parts to a sink or garbage bin and wash them down with some dish soap (or if we used vinegar in step one, just toss everything into the dishwasher!) Make sure there’s no cleaning solution left behind–just dump out any excess water and let everything air dry before you use it again.

3) Empty And Rinse The Carafe, Water Reservoir, And Filter Basket

Empty and rinse the carafe, water reservoir, and filter basket.

Now that all of those hard-to-reach corners have been cleaned out, we can move on to emptying our dirty carafe! If you used vinegar for this step then just toss it into your dishwasher or wash with some soap down by hand at a sink. Make sure to give everything another quick scrub if necessary–we don’t want any leftover grime from yesterday’s coffee sitting back in there now do we? Just make sure not to get too close towards the spout as some cleaners could potentially cause lining deterioration over time!

Once you’re done with that put your carafe aside and let it air dry while we go through the rest of these steps!

Next up is your water reservoir–simply dump out any excess cleaning solution or vinegar before washing with some dish soap, allowing to air dry, and popping it back into its place.

How To Clean The Filter

Step one is to remove the filter from your coffee maker. This is usually done by sliding the filter in its holder towards you until it pops out. There may be some extra bits of paper left around the edges, so use a toothbrush or cleaning brush to remove these pieces after popping out the filter itself.

Step two is to soak the entire thing–yes, everything including all parts that come with it–in white vinegar and water solution for about an hour. If there are any remaining stains on the inside of your reusable filter when this time has passed, feel free to scrub them away using either dish soap (for tough stains) or a soft-bristled toothbrush (gentler).

Rinse thoroughly under warm tap water before letting it dry overnight; then pop back into place!

How To Clean The Jug:

Step one is to remove the lid, which can be done by pulling it up and outwards. Be careful not to break any latches that may be holding your lid into place–if you do accidentally snap something off, don’t worry!

Ninja coffee makers are known for how easy they are to fix; simply contact customer service who should either send a replacement part or tell you where you can purchase one online (assuming this option doesn’t work).

Step two begins with removing all of the rubber parts from within your pitcher. This includes gaskets around every opening as well as the main seal at its base. Soak these items in warm water mixed with dish soap overnight that all traces of dirt come off.

The next day, remove from water and use a toothbrush or cleaning brush to scrub away any remaining dirt before rinsing them under warm tap water and allowing to air dry for about an hour.

Step three requires you to pop the gasket back in place at its base, followed by adding a mixture of white vinegar and water into your pitcher until it reaches halfway up the interior sides (the part without rubber). Place a lid over the top of this container–make sure that all openings are completely sealed!–and let soak overnight.

The next morning, grab both dish soap *or* a soft-bristled toothbrush along with either hot or cold tap water depending on what temperature is easiest for you to clean out the inside of your pitcher with.

It is particularly important that you pay close attention to the mesh filter at its base; this gasket can be scrubbed free of coffee stains using either dish soap or a soft-bristled toothbrush depending on how tough the stain is! Rinse the pitcher under warm tap water before allowing it to air dry for about an hour.

As always, use caution when cleaning any parts of your ninja coffee maker–the metal components are hot immediately after brewing so make sure not to burn yourself as you clean it out!

If you have small children in your home who may accidentally injure themselves while handling these items, strongly consider purchasing rubber gloves which will prevent cuts and scrapes if they should ever fall onto them.

How Often Do i Need To Clean My Ninja Coffee Maker?

Finally, it is important to note that the less often you have to clean your ninja coffee maker, the better. But as a general rule of thumb, you should at least be cleaning out all parts after every few uses.

This includes popping off and rinsing out its filter–even if there isn’t any noticeable buildup or dirt on it yet! The longer this stuff sits inside of your machine without being cleaned away, the harder it will become for water alone to remove them from their places.

Plus these items can sometimes harbor mold which could potentially make people sick if not removed in time!

Conclusion

It is important to note that you should never use soap or water on any of the metal components inside your ninja coffee maker. This includes any part where there’s a risk for steam exposure such as its base and exterior; also avoid using hot water when cleaning these items out if possible!

If none of this advice has helped you figure out how to clean ninja coffee maker, please contact customer service who can either send you replacement parts or tell you where to purchase them online.

Thank you for reading! I hope this blog post has been helpful in showing just how easy it is to clean a ninja coffee maker–and if any of the advice provided here doesn’t work out perfectly for your needs, please feel free to contact customer service who will be able to help you in a less intensive way!

Exit mobile version