You may choose to believe it or doubt it, but, in reality, the water heater is one of the most utilized appliances in a house. Due to the heavy workload it has to put up with, the machine needs a lot of attention. You must keep your eyes and ears open to see and hear how the water heater is performing. Now, it isn’t uncommon for a water heater to make some noise. However, if you hear sounds akin to knocking, humming, tapping, or screeching, you must get a professional plumber in San Fernando to take a look at it. Such noises usually point to the fact that your machine needs repairs or one or more parts replaced. This topic will tell you about the most common noises created by water heaters.
Table of Contents
Hammering and knocking
You may hear knocking and hammering noises coming from your water heater, which is usually the result of water crashing against the shutoff valves very quickly. If you ask a plumber, they’ll describe it as “water hammering.” It’s a unique phenomenon that creates loud noises, but you don’t have to worry too much about it. According to plumbers, this particular water heater issue is easy to fix. You just have to go to a local hardware store and buy a water hammer arrestor. The installation process of this arrestor is straightforward. Soon after attaching this component to your water heater, you’ll get rid of those sounds.
Humming
When water heaters start humming, the resulting noise can be unbearable and annoying. As soon as you encounter humming sounds, you can be certain that one or more of the machine’s components are becoming loose. Humming sounds usually happen when vibrations occur inside the hot water unit. The remedy is also simple enough, provided you catch the source of the problem sooner rather than later. So, what is the solution? First of all, you need to turn off the machine, inspect, and tighten all the necessary elements to stop the vibrations. You must be extra cautious while working on water heater units. The water stored inside the vessel will be extremely hot, and accidents may happen if you aren’t careful.
Tapping
According to the best plumber, tapping noises point to the fact that it’s time to replace or adjust the check valves. Tapping noises can also result from a much more significant problem – the building up of sediment inside the water storage tank. The solution is simple enough, of course. You need the services of a professional plumber. The specialist should inspect the machine’s heating systems and elements or the burner, the check valves, and even drain the tank entirely to remove the sediment deposits if necessary.
Screeching or screaming
Indeed, water heaters can scream while in use. If you hear something like it, you will know that there’s a problem hiding in the check valves in the water lines. When the check valves can’t open fully, the machine will force the water to squeeze through. As a result, it will build pressure and cause a high-pitched screeching sound. The solution is the same as the previous one. You must summon a plumber in Sacramento to inspect the check valves and see whether they’re opening and closing as they should or not. For this task, it’s best to hire a professional plumber. If your water heater is making knocking, screaming, humming, or tapping sounds, you shouldn’t keep your ears closed assuming that they’ll go away. There’s no need to spend money on another water heater, either. Just hire a plumber and get the issue checked. If the professional suggests buying a new one, only then you should consider replacing it.
